| ||||||||||||||||||
|
BPE6665 90 Degree Line Fitting #8 Discharge Line 90 degree line fitting, tube O-ring style, # 8 discharge line (3/4" Hose) with R134 high side charge port. Must be Professionally Bubble crimped to hose. 90 degree fittings work best when clearance is no problem, such as vehicles without Six Packs or Fresh Air Cleaner Applications. BPE6666 90 Degree Line Fitting #10 Suction Line 90 degree line fitting, tube O-ring style #10 suction line (7/8" Hose) with R134 low side charge port. Must be Professionally Bubble crimped to hose. 90 degree fittings work best when clearance is no problem, such as vehicles without Six Packs or Fresh Air Cleaner Applications. BPE6667 45 Degree Line Fitting #8 Discharge Line 45 degree line fitting, tube O-ring style #8 discharge line (3/4" Hose) with R134 high side charge port. Must be Professionally Bubble crimped to hose. 45 degree fittings work best when clearance is a problem, such as vehicle equipped with Six Pack or with Fresh Air Cleaners. (ie. coyote or shaker hood) BPE6668 45 Degree Line Fitting #10 Suction Line 45 degree line fitting, tube O-ring style #10 suction line (7/8" Hose) with R134 low side charge port. Must be Professionally Bubble crimped to hose. 45 degree fitting work best when clearance is a problem, such as vehicle equipped with Six Pack or with Fresh Air Cleaners. (ie. coyote or shaker hood) BPE6678 #12 Compression Fitting
Fitting used to Connect #12 (original suction hose size) Suction Hose to original 3/4" Tubing Found on original metal lines from evaporator. After bubble crimping hose to fitting, special compression fitting can be attached to O.E. tubing by tightening nut. O.E. metal line should be cleaned thoroughly with ScotchBrite pad and small amount of LockTite applied onto tube when using R134 Freon. BPE6679 #10 Compression Fitting
Fitting used to Connect #10 Suction Hose to original 3/4" Tubing Found on original metal lines from evaporator. After bubble crimping hose to fitting, special compression fitting can be attached to O.E. tubing by tightening nut. O.E. metal line should be cleaned thoroughly with ScotchBrite pad and small amount of LockTite applied onto tube when using R134 Freon.
Contact us by E-mail at: RB@bouchillonperformance.com |
