Do you have bent

Do you have bent, broke, or just can't find the correct Chrysler Pulleys to complete your project vehicle? Well once again, Bouchillon Performance Engineering Department has solved your problems. In a major undertaking, we have manufactured reproduction pulleys of the original Chrysler styles and are now available for all the popular applications, including all Big Block combinations, with or without power steering or air conditioning. We also make Small Block Pulleys, with aluminum water pump, with or without power steering. Also available are Power Steering Pulleys for Saginaw power steering pumps on B/RB/Hemi Applications. All pulleys are available individually or at an additional 5% savings in Pulley Sets. Choose Black Satin Finish, just like originals, or Chrome!
To View Satin Black Pulleys Sold Separately Simply Scroll Down This Page To View & Order:

Or To View Chrome Mopar Pulleys Sold Separately Click The Link Below:
Click Here For Chrome Finished Mopar Pulleys
Or Buy Your Mopar Pulleys In A Set & $ave!
Click Here To Order Your Chrome & Black Mopar Pulleys In A Set

NOTE: BPE9016 & BPE9017 Power Steering Pulleys Work With All Other BPE Pulley Combinations Including A-Engines, But For Use On A-Engines You Must Use This BPE9040 Spacer Kit (Click Here) For Correct Alignment.

Works w/ BPE4014, BPE4015 WaterP. Pulleys	BPE4011 Crankshaft Pulley Single Groove Crankshaft Pulley. Satin Black Finish Fits '70-'91 A-Engines w/ aluminum water pump, '65-Later B/RB/Hemi Engines, '87-'91 3.9L V-6 Engines, Magnum Crate Engines, All w/o P.S. or A.C. O.D. : 6 9/16"	BPE4011 Crankshaft Pulley Price: $50.75 Quantity:
Works w/ BPE4014, BPE4015 WaterP. Pulleys	BPE4012 Crankshaft Pulley Double Groove Crankshaft Pulley. Satin Black Finish Fits '70-'91 A-Engines w/ aluminum water pump, '65-Later B/RB/Hemi Engines, '87-'91 3.9L V-6 Engines, Magnum Crate Engines, All w/ P.S. w/o A.C. O.D. : 7 3/8" - 6 9/16"	BPE4012 Crankshaft Pulley Price: $78.01 Quantity:
Works w/ BPE4016 Water Pump Pulley	BPE4013 Crankshaft Pulley Four Groove Crankshaft Pulley. Satin Black Finish Fits '65-Later B/RB/Hemi Engines, All w/ P.S. & A.C. will work on 70 and later A-Engines with A.C. O.D. : 7" - 7 1/2"	BPE4013 Crankshaft Pulley Price: $144.95 Quantity:
Works w/ BPE4011, BPE4012 Crank Pulleys	BPE4014 Water Pump Pulley Single Groove Water Pump Pulley. Satin Black Finish Fits '65-Later B/RB/Hemi Engines, All w/ or w/o P.S. & A.C. O.D. : 6 7/8"	BPE4014 Water Pump Pulley Price: $57.37 Quantity:
Works w/ BPE4011, BPE4012 Crank Pulleys	BPE4015 Water Pump Pulley Single Groove Water Pump Pulley. Satin Black Finish Fits '70-'91 A-Engines w/ aluminum water pump, '87-'91 3.9L V-6 Engines, Magnum Crate Engines, All w/ or w/o P.S. & w/o A.C. O.D. : 6 7/8"	BPE4015 Water Pump Pulley Price: $59.21 Quantity:
Works w/ BPE4013 Crank Pulley	BPE4016 Water Pump Pulley Double Groove Water Pump Pulley, Satin Black Finish Fits all '65-Later B/RB/Hemi Engines w/ P.S. & w/ A.C. O.D. : 5 7/8"	BPE4016 Water Pump Pulley Price: $61.51 Quantity:
For Use w/ NON-A/C Pulleys & Mounting Brackets. Use w/ BPE4011, 4012, 4014, 4015	BPE4020 Single Groove Alternator Pulley Fits: Most all Non A/C Applications Press On Style - Standard Chrysler Alternator 40 - 75 Amps	BPE4020 Single Groove Alternator Pulley Price: $24.40 Quantity:
For Use w/ A/C Puellys & Mounting Brackets. Use w/ BPE4013, BPE4016	BPE4021 Double Groove Alternator Pulley Fits: Most all Factory A/C Applications Press On Style - Standard Chrysler Alternator 40-75 Amps	BPE4021 Double Groove Alternator Pulley Price: $32.65 Quantity:
Works w/ BPE4013, BPE4016 Factory A/C Setup.	BPE4025 Idler Pulley For B/RB Factory AC Engines Replacement Idler Pulley for B/RB Engines with factory AC. You must reuse the original idler bracket along with bracket spacer. This Idler Pulley kit has the ability of replacing the bearing, at a latter date if needed. It comes complete with shoulder mounting bolt, nut, lock washer, and alignment shims. Pulley diameter is 3 "/16", Same as original from Chrysler.	BPE4025 Idler Pulley For B/RB Factory AC Engines Price: $23.59 Quantity:
	BPE4026 Backside Idler Pulley Replacement For Some 1969 & Earlier Factory A/C Bolt On - Pulley has Removable & Replaceable Bearing For A/C Equipped A-Engines	BPE4026 Back Side Idler Pulley Price: $54.90 Quantity:
Works w/ ALL BPE Pulley Combinations.	BPE9016 Saginaw Power Steering Pump Pulley Single Groove Saginaw Power Steering Pump Pulley, Keyed with Nut pump, Satin Black Finish Fits '65-Later B/RB/Hemi Engines w/ or w/o A.C. O.D. : 6 7/8" For Use On A-Engines You Must Use This BPE9040 Spacer Kit (Click Here) For Correct Alignment.	BPE9016 Saginaw Power Steering Pump Pulley Price: $85.80 Quantity:
Works w/ ALL BPE Pulley Combinations.	BPE9017 Saginaw Power Steering Pump Pulley Single Groove Saginaw Power Steering Pump Pulley, Press Fit Style Pump Pulley, Satin Black Finish Fits '65-Later B/RB/Hemi Engines w/ or w/o A.C. O.D. : 6 7/8" For Use On A-Engines You Must Use This BPE9040 Spacer Kit (Click Here) For Correct Alignment.	BPE9017 Saginaw Power Steering Pump Pulley Price: $84.61 Quantity:
New BPE Original Equipment Style Street Hemi Pulleys "Only For Original Street Hemi Dampers!"
	BPE4248 Original Hemi Crank Pulley w/ Power Steering Fits: 1969-1971 Hemi Engines with original street Hemi damper ONLY! Note: None AC Only	BPE4248 OE Hemi Crank Pulley w/PS Price: $203.00
	BPE4253 Original Hemi Water Pump Pulley w/ or w/o Power Steering Fits: 1969-1971 Hemi Engines with original street Hemi damper ONLY! Note: None AC Only	BPE4253 OE Hemi Water Pump Pulley Price: $162.00
	BPE9270 Original Hemi Federal Power Steering Pump Pulley - Press Fit Fits: 1968-1971 Hemi Power Steering Pumps w/Press On Pulley. Note: None AC Only	BPE9270 OE Hemi Federal PS Pump Pulley Price: $203.00

BPE Reproduction Steel Mopar Pulleys can be seen in all 7 popular magazines in 2003 you see located to the left. We will have all of the magazine articles posted here on the site in the very near future until then view these three of seven articles.

Hot Rod January 2003

Mopar Action Feburary 2003

Mopar Action April 2003

ü Always Clean Mounting Surfaces for Pulleys to be Installed. Pulleys should be a Firm Fit.

Make Sure Harmonic Balancer Centering Ring is Free of Rust, Dings & Paint. Its is not

unusual to use a small file on centering ring on Original or Reused Balancers.

ü Always Check Pulley Alignment Visually, Keep in Mind, There are a Lot of Items that Can

Cause Pulley Misalignment. Water Pump assembly - Timing Cover – Installation

of Crank Gear onto Crankshaft – Harmonic Damper Not Installed Correctly.

ü Pulley Alignment Can be Corrected, GENERALLY, by Shimming Pulley or Bracket

with Brass Shim Stock. Pulley Alignment Within 1/16” on Pulleys that Are Close

Are Acceptable. Pulleys that Are far apart, 1/8”-1/4” is Acceptable.

ü Power Steering Pulleys are Different From A-Engine to B/RB/Hemi Engines

Applications. This Also Includes There Mounting Brackets ’70-Later. A-Engines Can

Use BPE9016 or BPE9017 P.S. Pulleys Along w/ BPE9040 Bracket Spacer Kit, either

using Factory P.S. Brackets or BPE9014.

ü When Changing From A.C. to Non-A.C. Pulleys or Vic Versa, Alternator Mounting

Brackets are different on both A-Engines & B/RB/Hemi Engines.

ü Double Groove Alternator pulleys will work with single groove pulleys

sets. (Slight Misalignment)

ü Aftermarket performance dampers may cause pulley misalignment. Refer to "Pulley Fit Specification

Picture & Dimensions"

ü Chrome Finishes require regular cleaning maintenance to resist chrome finish

damage due to the elements.

ü A Engine Pulley Will Fit Magnum Crate Engines or Magnum Engines using Pre-'92 A-engine

Timing Cover and Pre-'92 A-engine Aluminum Water Pump. Will not fit fuel injected Magnum engines.

ü Crankshaft Pulleys will not work with original Street Hemi "Thick Production

Style" Dampeners.

ü 9016,9016C,9017 & 9017C are designed to work on B/RB/Hemi Engines with Saginaw Pumps

Only, but can be used on ’70-later A-Engines using BPE9040 Spacer & Bolt Kit.

ü We Do Not manufacture any Pulleys that will work on '69 & Earlier A-Engines with Cast

Iron Water Pump.

ü Saginaw Power Steering Pumps all have pressure ports located on the rear, lower section

of the pump. Federal Thompson pumps have the pressure port located in the front

and on the driver’s side of the pump.

ü You Can Not Mix and Match Factory A/C Pulleys with Non-A/C Pulleys. Alternator

Mounting Brackets are also Different From Non-A/C to A/C Engines. BPE4014 or BPE4015 WILL

NOT WORK WITH 3 Groove or 4 Groove Crank Pulleys. BPE 4016 WILL NOT WORK

WITH ANYOTHER PULLEY BUT BPE4013 or 4 Groove Crank)

ü When Removing A/C, you can not just install pulleys, you Must Replace CrankShaft

Pulley & Water Pump Pulley Along with Alternator Mounting Bracket, When Installing

A/C, You Must Replace CrankShaft Pulley & Water Pump Pulley Along With

Alternator Mounting Bracket.

ü When Using BPE 4016 Double Groove Water Pump Pulley along with BPE4013 4 Groove

CrankShaft Pulley For B/RB/Hemi Crate Engines with A/C, You can elect not to use Original

Water Pump Belt Idler Pulley & Bracket, Only Using a 3 Belt System. Leaving Outer Crank Pulley

& Outer Water Pump Pulley Groove Vacant.

ü All Pulleys & Bracketry By BPE Are Designed To Work With Standard Style Chrysler

Alternators only. High Amperage Output Versions Original Style Alternators Are Available

from BPE, Most Having Idle (1,000RPM) Output Of 55Amps and Output 90-95Amps at 2,500RPM.

Attention: Read This Important BPE Pulley Information

BPE Reproduction Pulleys are stamped steel, just like the originals manufactured by Chrysler.

As in all Stamped Steel Pulleys, Including The Originals by Chrysler, Pulley Concentricity (Roundness)

May Vary .020” - .070” (Up to Approximately 1/16”). This Does Not Effect The Ability Of the

Pulley to Run True and Retain Its Belt Throughout the Power Band Of the Engine.

Pulley Fit Specification Picture

Click on the Picture Above to Understand

How to Measure Your Engine